BTS3142DATMA1
| Parameters | |
|---|---|
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 59W |
| Output Current | 4.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 42V |
| Nominal Input Voltage | 42V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 42V Max |
| Max Dual Supply Voltage | 42V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 23m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 59W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Base Part Number | BTS3142 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | N-Channel |
| Max Output Current | 4.6A |
BTS3142DATMA1 Overview
A Tape & Reel (TR) is used to package it.There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There is a BTS3142 family of things that it belongs to.It contains 2 terminations.As far as the lighting driver is concerned, there are 1 functions.It is necessary to reduce the maximum output current to 4.6A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.This electrical component can be found in the HITFET? series.The output current is set to 4.6A in this case.
BTS3142DATMA1 Features
BTS3142DATMA1 Applications
There are a lot of Infineon Technologies BTS3142DATMA1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Telecom and Network Systems
- HDD, SSD
- PC Cards
- PC Card Hot Swap
- Various applications equipped with buttons
- Handheld Devices
- Set-top-box
- Wireless Headsets
- Portable GPS