BTS3110NHUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Base Part Number | BTS3110 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | N-Channel |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 3.8W |
| Output Current | 1.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Drain to Source Voltage (Vdss) | 42V |
| Nominal Input Voltage | 10V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 42V Max |
| Max Dual Supply Voltage | 42V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 150m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS3110NHUMA1 Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package TO-261-4, TO-261AA.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the family BTS3110.A total of 4 terminations have been recorded.In order to operate, the 4 pins are used.It consists of 1 functions.The lighting driver is mounted in the way of Surface Mount.In total, it has 4 pins.This electrical component can be found in the HITFET? series.It is set to 1.4A in this case.
BTS3110NHUMA1 Features
BTS3110NHUMA1 Applications
There are a lot of Infineon Technologies BTS3110NHUMA1 Power Switches ICs applications.
- Solid State Drivers
- Set-Top Boxes
- Set-top-box
- Solid-State Drives
- Hot Swap
- Portable/Handheld Devices
- Telecom and Network Systems
- Storage Drives
- PC Cards
- Notebook PC