BTS118DATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | HITFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 21W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.28mm |
| Base Part Number | BTS118 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | N-Channel |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 21W |
| Output Current | 2.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 42V |
| Nominal Input Voltage | 10V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 42V Max |
| Max Dual Supply Voltage | 42V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 15A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS118DATMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the TO-252-3, DPak (2 Leads + Tab), SC-63 package as well.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.It has a total of Auto Restart features.It is part of the BTS118 family of LED drivers.There are 2 terminations in it.The 3 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.The supply voltage can be 12V for high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 4 pins are present on it.This electrical component is part of the HITFET? series.This case has the output current set to 2.4A.
BTS118DATMA1 Features
Supplied from 12V
BTS118DATMA1 Applications
There are a lot of Infineon Technologies BTS118DATMA1 Power Switches ICs applications.
- Solid-State Drives
- Hot-Swap Systems
- HDD, SSD
- Storage Drives
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Wearable Devices
- Portable GPS
- Notebook and Tablet Computers
- Hot Swap