BTN7963BAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Supplier Device Package | PG-TO263-7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | NovalithIC™ |
| Feature | Latch Function, Slew Rate Controlled, Status Flag |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Applications | DC Motors, General Purpose |
| Technology | DMOS |
| Voltage - Supply | 4.5V~28V |
| Base Part Number | BTN7963 |
| Max Output Current | 90A |
| Operating Supply Voltage | 18V |
| Interface | Logic |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Output Configuration | Half Bridge |
| Halogen Free | Halogen Free |
| Output Current per Channel | 44A |
| Voltage - Load | 4.5V~28V |
| Current - Output / Channel | 44A |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Rds On (Typ) | 9mOhm LS, 7mOhm HS |
| Current - Peak Output | 90A |
| Load Type | Inductive |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTN7963BAUMA1 Overview
Tape & Reel (TR) is used to package H bridge.H bridge is included in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package as a cost-saving measure.Bridge driver is possible to improve the reliabilbridge drivery of 4.5V~28V by increasing the supply voltage.H bridge circuit is put into place in the way of Surface Mount.As long as -40°C~150°C TJ operates at the right temperature, motor driver H bridge will operate normally.There are a variety of applications for H bridge motor driver, including DC Motors, General Purpose.The board is mounted using Surface Mount.Latch Function, Slew Rate Controlled, Status Flag is one of full bridges specific characteristics.The base H bridge ic number of BTN7963 can be used to find related H bridge ics.A H-bridge belonging to the NovalithIC? series, it is an electronic H-bridge.At a specified ambient temperature, the maximum load current that the power supply can provide is 90A.A maximum current is reached by output when H-bridge reaches 90A.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 18V.The maximum acceptable operating temperature is 150°C in order to avoid excessive costs.So as not to incur excessive costs, H bridge is acceptable for the operating temperature to be -40°C.
BTN7963BAUMA1 Features
Available in TO-263-8, D2Pak (7 Leads + Tab), TO-263CA Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BTN7963
Subcategory: 90A
Number of Receivers: 18V
Operate supply voltage at -40°C
BTN7963BAUMA1 Applications
There are a lot of Infineon Technologies BTN7963BAUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- DC-DC Converters
- Industrial Pumps
- Home Appliances
- Workstations
- Notebook Computers
- Optical disc drives
- Industrial Fans
- Quad DC motor
- Bipolar stepper motor
- Networking Microprocessor Voltage Regulators