BTM7741GXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | TrilithIC™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | DC Motors, General Purpose |
| Technology | DMOS |
| Voltage - Supply | 1.8V~42V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTM7741 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Interface | Logic |
| Nominal Supply Current | 3.2mA |
| Output Configuration | Half Bridge (2) |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 42V |
| Voltage - Load | 1.8V~42V |
| Fault Protection | Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 180 µs |
| Output Peak Current Limit-Nom | 15A |
| Rds On (Typ) | 100m Ω LS, 110m Ω HS |
| Turn Off Time | 180 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Current - Peak Output | 10A |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 18.1mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTM7741GXUMA1 Overview
To package H bridge, use Tape & Reel (TR).In an effort to save money, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.In addbridge driverion, 1.8V~42V can be used to improve reliabilbridge drivery.H bridge circuit is mounted in the way of Surface Mount.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose as well.In order to mount H gate on the PCB, Surface Mount is used.Full bridge also possesses Status Flag as a specific characteristic.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 28 termination.Signal interfaces use 28 pins as pronged contacts.Its base H bridge ic number, BTM7741, can be used to locate other H bridge ics that are related.To operate H bridge circuit, a voltage supply of 12V is required.This is a type of electronic H-bridge that belongs to the TrilithIC? series.The output reaches a maximum current when H-bridge reaches 10A.This bridge driver functions in part thanks to the 28 pins working together.4 outputs are provided.
BTM7741GXUMA1 Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : BTM7741
Subcategory: 10A
BTM7741GXUMA1 Applications
There are a lot of Infineon Technologies BTM7741GXUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- VTR
- Compact Blade Servers
- Industrial Fans
- Small Form-Factor Voltage Regulator Modules
- Bipolar stepper motor
- Voltage Regulators for CPUs
- Industrial Automation
- Non-V-Core
- Notebook Computers
- High-Performance Gaming Motherboards