BSP742RNUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 400mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 250m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
BSP742RNUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 8 terminations.Currently, the lighting driver has a total of 1 functions.This LED driver has a maximum output of 400mAV.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.The LED driving board is equipped with a total of 8 pins.It is included in the Automotive, AEC-Q100 series.The Vsup value (maximum supply voltage) is set to 34V.Normal operation requires Vsup above 5V.
BSP742RNUMA1 Features
Supplied from 13.5V
BSP742RNUMA1 Applications
There are a lot of Infineon Technologies BSP742RNUMA1 Power Switches ICs applications.
- Hot Swap
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Solid State Drivers
- Wireless Headsets
- PDAs
- Telecom and Network Systems
- PC Card Hot Swap
- Low Voltage I/O System Power
- Notebook PC