BQ24202DGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ24202 |
| Pin Count | 8 |
| Output Voltage | 4.1V |
| Number of Channels | 1 |
| Max Supply Voltage | 13.5V |
| Min Supply Voltage | 2.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | NO |
| Min Input Voltage | 2.8V |
| Nominal Input Voltage | 13.5V |
| Fault Protection | Over Temperature, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant |
| Battery Pack Voltage | 4.2V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24202DGNG4 Overview
There is an Tube package that contains it. It comes as part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.The mounting type of the device is Surface Mount.The best way to adjust the temperature is to set it to -40°C~125°C TJ.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Charge the device with Constant current.The related parts of the base part number BQ24202 can be found by following the order of the base part number.8 terminations are present.Hence, the battery pack is at 4.2V when it comes to voltage.In total, it has 8 pins.Features like Current, Timer can be programmed.During the installation process, this product requires the connection of 8 pins.The number of available channels is 1.To ensure the device works properly, the supply voltage should not exceed 13.5V.With a 4.1V output voltage, high efficiency is possible.It is in this instance that the device's output current is set to 500mA.At a low supply voltage, such as 2.8V, it can operate to the best of its ability.Input voltage minimum is 2.8V volts, which is a requirement of the device.With this device, it is also possible to generate the additional features of OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE.
BQ24202DGNG4 Features
Battery pack voltage of 4.2V
1 channels
Addtional features of OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
BQ24202DGNG4 Applications
There are a lot of Texas Instruments BQ24202DGNG4 Battery Chargers ICs applications.
- Industrial
- Electric lift car
- GPS tracker
- Robot
- Home routers
- Portable speaker systems
- High end, feature-rich consumer
- Truck dealers
- Electric vehicles
- Mobile router