BQ24193RGET
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3.8V |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24193 |
| Output Voltage | 4.4V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 3.9V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 15mA |
| Output Current | 4.2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 3.9V |
| Max Input Voltage | 17V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 17V |
| Threshold Voltage | +18V |
| Fault Protection | Over Current, Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 4.5A |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24193RGET Overview
There is a package Tape & Reel (TR) available.It is contained in a package named 24-VFQFN Exposed Pad.Mounting type is Surface Mount.The correct temperature setting is -40°C~85°C TA.A analog IC of POWER SUPPLY MANAGEMENT CIRCUIT has been used in the design of this device.The device needs to be charged at a current of Constant - Programmable in order to function.With the base part number BQ24193, it is possible to find related parts.In total, there are 24 terminations.It is a 4.2V voltage for the battery pack.At the maximum charging current, it has a rating of 4.5A.For the product to work correctly, 24 pins are required, and a connection to each pin is required.The total number of channels that can be accessed by users is 1.An input voltage that is equal to 17V can be applied to it without any problem.Using a 4.4V output voltage results in high efficiency.A 4.2A output current is used for operation.Subcategory 0 is home to this device.The device can operate at as low a supply voltage as possible, such as 3.9V.It is mounted in the way of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3mA.It has a 3.9V volt minimum input voltage.Supply current for the gadget is set to 15mA.It operates at a switching frequency of 1.5MHz.A maximum input voltage of 17V volts can be applied to it.In addition to the features above, the device can also generate the following features of DETECTION THRESHOLD VOLTAGE IS 3.8V.
BQ24193RGET Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
Addtional features of DETECTION THRESHOLD VOLTAGE IS 3.8V
24-VFQFN Exposed Pad package
BQ24193RGET Applications
There are a lot of Texas Instruments BQ24193RGET Battery Chargers ICs applications.
- Electric lift car
- Modern LA
- Battery backup applications
- Opportunity charge
- Medical
- Wireless headphones
- Solar charging
- Portable speaker systems
- Electric vehicles
- Electric tour bus