BQ24160YFFT
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 49-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 49 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | BQ24160 |
| Pin Count | 49 |
| Output Voltage | 4.44V |
| Max Output Current | 2.5A |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 15mA |
| Output Current | 2.5A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.44V |
| Min Input Voltage | 4V |
| Nominal Input Voltage | 10V |
| Min Output Voltage | 3.5V |
| Threshold Voltage | +3.8V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 3.7V |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 425μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24160YFFT Overview
I found it in the Tape & Reel (TR) package, which comes with everything you need.It is contained in a package named 49-UFBGA, DSBGA.A mounting type of Surface Mount has been specified for this device.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.Charge the device by supplying it with Constant - Programmable current.This device's related parts can be found under the base part number BQ24160.It contains a total of 49 terminations.Batteries pack have 3.7V.It has a total of 49 pins on it.For the product to work correctly, 49 pins are required, and a connection to each pin is required.A total of 1 channels are available.Batteries with 5V should be able to power it.To ensure the device works properly, the supply voltage should not exceed 10V.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.44V.Operation is done using a 2.5A output current.The device falls under the Power Management Circuits subcategory.The device can operate at as low a supply voltage as possible, such as 4.2V.Input voltage must be at least 4V volts in order to function.The gadget's supply current is set to 15mA.It operates at a switching frequency of 1.5MHz.It is required that a maximum supply voltage of 4.44V be applied as the output voltage for this operation.During operation, the maximum output current is reduced to 2.5A.
BQ24160YFFT Features
Battery pack voltage of 3.7V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
49-UFBGA, DSBGA package
BQ24160YFFT Applications
There are a lot of Texas Instruments BQ24160YFFT Battery Chargers ICs applications.
- Industrial handhelds
- Drone
- Smart speakers
- Home routers
- Truck dealers
- Conventional charge
- Ruggedized notebooks/tablet computers
- Personnel carriers
- Electronic dictionary
- Power tools