BQ24103ARHLR
| Parameters | |
|---|---|
| Min Input Voltage | 4.3V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16V |
| Switcher Configuration | BUCK |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 2 |
| Switching Frequency | 1.1MHz |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 8.4V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | bqSWITCHER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24103 |
| Pin Count | 20 |
| Output Voltage | 4.2V |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
BQ24103ARHLR Overview
There is an Tape & Reel (TR) package that contains it. To make it easier for you, it is included with the 20-VFQFN Exposed Pad package.It appears that the device's mounting type is Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.This device makes use of an analog IC called BATTERY CHARGE CONTROLLER in order to provide its functionality.Charge the device by providing it with Constant - Programmable current.It is possible to find related parts of this device by using the base part number BQ24103.It contains a total of 20 terminations.For the battery pack, it is 8.4V.20 pins are on it in total.Current, Timer are a programmable feature.It requires pins 20 to function.There is no damage to the device if an input voltage of 16V is applied.In the case of a 4.2V output voltage, high efficiency is possible.In order to operate, an output current of 2A is used.Using a supply voltage as low as 4.35V will allow it to function.During the design process, Vsup (maximum supply voltage) was set to 5mA.This component is a member of the electrical component series bqSWITCHER?.Input voltage minimum is 4.3V volts, which is a requirement of the device.In this particular part, the switching frequency is set to 1.1MHz.
BQ24103ARHLR Features
Battery pack voltage of 8.4V
Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package
BQ24103ARHLR Applications
There are a lot of Texas Instruments BQ24103ARHLR Battery Chargers ICs applications.
- Fast charge
- GPS portable devices
- Pallet jacks
- Power tools
- Painting boat
- Wireless headphones
- Smart cameras
- Industrial handhelds
- Industrial lighting
- Tablets