BD9011KV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD901* |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 10mA |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 3.9V~30V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3.9V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 550kHz |
| Output Phases | 1 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD9011KV-E2 Overview
The switching controller fits in the 48-LQFP package and is ideal for most applications. 2 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. 3.9V~30V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~105°C TA. A switching controller such as this can switch at a value of 300kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Enable, Frequency Control, Soft Start for efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at QUAD . The 48 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. A search for "BD901*" will reveal other relevant dc to dc converter ics. There are only 48 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 3.9V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 5V. normally, the dc dc regulator's output current is 10mA, which you should keep in mind when starting a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 550kHz. It is suggested that users apply 30V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The dc switcher will not provide an output current greater than 10mA.
BD9011KV-E2 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
BD9011KV-E2 Applications
There are a lot of ROHM Semiconductor BD9011KV-E2 DC to DC converter applications.
- Radio equipment
- Smoke prevention equipment
- Milling machines
- Combined machine tools
- Special machining machine tools
- Packaging
- Experimental setup
- Wind power
- Cutting machine tools
- Product burn-in