BD82000FVJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Configuration | High Side |
| Turn On Delay Time | 1.1 ms |
| Turn-Off Delay Time | 10 μs |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1A |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD82000FVJ-E2 Overview
A Tape & Reel (TR) is used to package it.This package is included in TSSOP.There are 1 outputs available on this lighting driver.It consists of 8 terminations in total.It is necessary to use the 8 pins in order to operate the LED driver.It contains 1 functions.Maximum output current falls to 1.5A when operation criteria are met.A supply voltage of 5V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.The LED driver has 110mOhm resistance.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 5V.For stable operation, the maximum operating temperature is 85°C°C.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.It can handle a maximum voltage of 5.5VV.It is also capable of running at 2.7V volts if necessary.
BD82000FVJ-E2 Features
Supplied from 5V
Resistance of 110mOhm
BD82000FVJ-E2 Applications
There are a lot of ROHM Semiconductor BD82000FVJ-E2 Power Switches ICs applications.
- Portable GPS
- Portable Devices
- Gaming
- Handheld Devices
- Mobile Communication Devices
- Hot Swap
- Set-Top Boxes
- Wireless Modem Data Cards
- PC Card Hot Swap
- USB Ports/Hubs