BD6061GUT-E2
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA, CSPBGA |
| Number of Pins | 8 |
| Supplier Device Package | VCSP60N1 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Applications | Backlight |
| Frequency | 1MHz |
| Base Part Number | BD606* |
| Number of Outputs | 1 |
| Max Output Current | 200mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Max Output Voltage | 18V |
| Voltage - Output | 18V |
| Topology | Step-Up (Boost) |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 270mA Switch |
| Internal Switch(s) | Yes |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6061GUT-E2 Overview
In order to save board space, the 8-UFBGA, CSPBGA package is used. LED drivers design with 1 outputs.Surface Mount represents this mounting method.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.LED drivers capable of operating at -30°C~85°C TA can be used.Backlight has many advantages.A frequency of 1MHz is used as the basis for operation.The base of this board is configured as 8 pins.In the absence of a voltage supply of at least 2.7V, undetermined failures may occur.This is mounted by Surface Mount.This LED driver has the part number BD606*.It is acceptable for the voltage to be 5.5V.The output voltage is 18V.There is a maximum value of 5.5V supply voltage supported by this device. The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.It reaches 5.5V when the maximum supply current is allowed.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.Stable operation requires a temperature higher than -30°C.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 200mA.Ideally, the output voltage should not exceed 18V.
BD6061GUT-E2 Features
Available in the 8-UFBGA, CSPBGA package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
BD6061GUT-E2 Applications
There are a lot of ROHM Semiconductor BD6061GUT-E2 LED Driver ICs applications.
- Street lighting
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- Portable lighting
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for portable equipment
- A- lamps
- Replacement lamps
- Down lights
- High-end retail lighting