BD4933FVE-TR
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-665 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | BD49xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 3.1V |
| Base Part Number | BD49 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Max Supply Current | 1.68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 3.251V |
| Max Reset Threshold Voltage | 3.35V |
| Threshold Voltage | +3.3V |
| Height Seated (Max) | 0.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4933FVE-TR Overview
A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SOT-665 package. There are a lot of similarities between this IC management and other Voltage Detector products. When a supply voltage of 3.1V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. This power management system has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than -300mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. To find similar IC managements from the manufacturer, you can always search by BD49. It requires 3.3V watts of power to operate this voltage supervisor. Voltage supervisor can work with a supply temperature of 1.68μA at the most. The PMIC is a kind of the well-known BD49xxx series of products.
BD4933FVE-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4933FVE-TR Applications
There are a lot of ROHM Semiconductor BD4933FVE-TR Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Analog circuit
- Multi-voltage system
- Power distribution systems of ICU
- Smartphones
- Dash board
- Rechargeable batteries
- Embedded computing
- Transformer load monitoring equipment
- Electrical fire monitoring system