BD2224G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD2224 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 550mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.35A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BD2224G-TR Overview
A Tape & Reel (TR) is used to package it.There is a SC-74A, SOT-753 package that includes it.The LED driver is mounted as Surface Mount.A USB Switch switch type is owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It comes under the family of BD2224.A total of 5 terminations can be found in it.It is necessary to use the 5 pins in order to operate the LED driver.It has 1 functions.This operation requires the maximum output current to be decreased to 550mA.As long as the supply voltage is 5V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 5 pins.Currently, the LED driving board has a resistance of 200mOhm ohms.As a result, the output current is set to 350mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A 5V power supply is used by the part.In order to maximize efficiency, the supply voltage should be set to 5V.
BD2224G-TR Features
Supplied from 5V
Resistance of 200mOhm
BD2224G-TR Applications
There are a lot of ROHM Semiconductor BD2224G-TR Power Switches ICs applications.
- Storage Drives
- PDAs
- Hot Swap
- Handheld Devices
- HDD and SSD
- Smartphone and PDA
- Wearable Devices
- Hard Disk Drives
- Solid State Drivers
- Various applications equipped with buttons