BD2042AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 130MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Base Part Number | BD20*2A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Max Output Voltage | 6V |
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 6000 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.375mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2042AFJ-E2 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.The switch type is USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Status Flag features.The BD20*2A family consists of this type.It has a total of 8 terminations.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.In this case, there is 130MOhm resistance in the LED driving board.This case has the output current set to 500mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this part, the power supply is set to 5V.The maximum input voltage is 5.5V volts.
BD2042AFJ-E2 Features
Supplied from 5V
Resistance of 130MOhm
BD2042AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2042AFJ-E2 Power Switches ICs applications.
- Wireless Headsets
- Mobile Communication Devices
- Storage Drives
- Portable GPS
- Portable Music Players
- Hot Swaps
- Solid-State Drives
- Low Voltage I/O System Power
- Portable GPS Device
- HDD, SSD