BD1604MVV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 780mW |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | BD1604 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.6V |
| Power Dissipation | 780mW |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| fmax-Min | 1.2 MHz |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD1604MVV-E2 Overview
The 16-VQFN Exposed Pad package is used for saving board space. LED drivers design with 4 outputs.We are using Surface Mount as the mounting method.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is able to work normally at the operating temperature of -30°C~85°C TA.It is clear that Backlight will benefit from the program.In this case, the frequency is 1MHz.A termination of 16 is used to operate the LED driver.To form its configuration, there are 16 pins.Undetermined failures may occur if the voltage supply falls below 2.7V.There are 4 segments.Surface Mount is mounted on it.The LED driver can be found under the base part number BD1604.This device contains 16 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.Powering systems requires an internal voltage of 5.5V.The voltage at the output terminal is 5V.
BD1604MVV-E2 Features
Available in the 16-VQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Output voltage of 5V
BD1604MVV-E2 Applications
There are a lot of ROHM Semiconductor BD1604MVV-E2 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Gallery lighting
- Refrigeration lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
- Museum lighting
- Down lighting
- Stage Lighting and Signage
- Replacement lamps
- Scanners and Handy Terminals