AUIR3314S
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3314S |
| JESD-30 Code | R-PSSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 32V |
| Power Supplies | 6/26V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 18A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 55 μs |
| Rds On (Typ) | 9m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.83mm |
| Width | 9.08mm |
| RoHS Status | RoHS Compliant |
AUIR3314S Overview
Tube is how it's packaged.The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package contains it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The AUIR3314S family consists of this type.There are 5 terminations in it.It consists of 1 functions.The LED driver output is limited to 18AV.High efficiency is possible when the supply voltage is set to 14V.It belongs to the Automotive, AEC-Q100 series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 32V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 6V.This part has a power supply of 6/26V.
AUIR3314S Features
Supplied from 14V
AUIR3314S Applications
There are a lot of Infineon Technologies AUIR3314S Power Switches ICs applications.
- Portable/Handheld Devices
- Hot Swaps
- Wearable Devices
- Gaming
- Various applications equipped with buttons
- Portable GPS Device
- USB Power Distribution
- Handheld Devices
- Portable Video Game Players
- USB Ports/Hubs