AUIPS7145RTRL
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Base Part Number | AUIPS7145R |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.1A |
| Power Supplies | 28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 60V |
| Output Current per Channel | 2.1A |
| Nominal Input Voltage | 60V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Rds On (Typ) | 75m Ω |
| Turn Off Time | 80 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 23 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
AUIPS7145RTRL Overview
Tape & Reel (TR) is how it's packaged.It's included in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.I believe it belongs to the AUIPS7145R family.In total, there are 5 terminations.The operation is carried out using the 5 pins.The LED driver has 1 functions.The maximum output current must drop to 2.1A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 28V.Surface Mount is mounted in the way.75mOhm resistance is present in the lighting driver.This electrical component is included in the Automotive, AEC-Q100 series.The output current is set to 2.1A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.For normal operation, the supply voltage (Vsup) must be kept above 6V.This part is powered by 28V.It has a maximum input voltage of 60V volts.It requires 6V volts as the minimum input voltage.
AUIPS7145RTRL Features
Supplied from 28V
Resistance of 75mOhm
AUIPS7145RTRL Applications
There are a lot of Infineon Technologies AUIPS7145RTRL Power Switches ICs applications.
- Solid State Drivers
- Hot Swap
- Notebook and Tablet Computers
- Hot Swaps
- PC Cards
- HDD, SSD
- Smartphone and PDA
- Portable GPS Device
- Smart Phones, Feature Phones
- PC Card Hot Swap