AUIPS7142GTR
| Parameters | |
|---|---|
| Base Part Number | AUIPS7142G |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Power Supplies | 6/50V |
| Voltage | 60V |
| Interface | On/Off |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 3W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 60V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Turn Off Time | 80 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 2.33mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 19 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
AUIPS7142GTR Overview
It is packaged in the form of a Tape & Reel (TR).The 16-SOIC (0.295, 7.50mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 2 outputs.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.The AUIPS7142G family consists of this type.A total of 16 terminations have been recorded.For operation, we use the 16 pins.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.Using a voltage of 28V allows for high efficiency.It is mounted in the way of Surface Mount.It has a resistance of 75mOhm.This electrical component is included in the Automotive, AEC-Q100 series.The output current is set to 1.5A in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this case, the power supply is 6/50V.
AUIPS7142GTR Features
Supplied from 28V
Resistance of 75mOhm
AUIPS7142GTR Applications
There are a lot of Infineon Technologies AUIPS7142GTR Power Switches ICs applications.
- Portable Music Players
- Notebook and Tablet Computers
- Portable GPS Device
- USB3.1 Power Delivery
- Portable Devices
- Hot Swap
- Smart Phones, Feature Phones
- Smartphone and PDA
- USB Protection
- USB Ports/Hubs