AUIPS7111S
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS7111S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 10A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~50V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 50 µs |
| Rds On (Typ) | 6m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.084mm |
| Width | 9.08mm |
| RoHS Status | RoHS Compliant |
AUIPS7111S Overview
Tube is how it's packaged.This package is included in TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of AUIPS7111S.A total of 4 terminations can be found in it.It contains 1 functions.This LED driver has a maximum output of 10AV.High efficiency is possible when the supply voltage is set to 28V.A maximum supply voltage of 50V is set in Vsup.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 8V.
AUIPS7111S Features
Supplied from 28V
AUIPS7111S Applications
There are a lot of Infineon Technologies AUIPS7111S Power Switches ICs applications.
- PC Card Hot Swap
- Various applications equipped with buttons
- Telecom and Network Systems
- PC Cards
- Wireless/Networking Cards
- Hot-Swap Systems
- Notebook and Tablet Computers
- HDD and SSD
- Portable Music Players
- HDD, SSD