AUIPS1011RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.29mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1011R |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 10m Ω |
| Turn Off Time | 700 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Length | 6.54mm |
| Width | 6.095mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIPS1011RTRL Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.This object belongs to the AUIPS1011R family.It contains 2 terminations.The 3 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 6A to meet the operation criteria.Supply voltages of 14V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.In this case, there is 10mOhm resistance in the LED driving board.The Automotive, AEC-Q100 series includes this electrical component.This results in a 6A output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, Vsup (maximum supply voltage) is set to 28V.Normal operation requires a voltage above 6V for the supply voltage.This part's power supply is 6/28V.
AUIPS1011RTRL Features
Supplied from 14V
Resistance of 10mOhm
AUIPS1011RTRL Applications
There are a lot of Infineon Technologies AUIPS1011RTRL Power Switches ICs applications.
- Handheld Devices
- Set-top-box
- PC Cards
- USB3.1 Power Delivery
- Wireless/Networking Cards
- Low Voltage I/O System Power
- HDD, SSD
- Portable GPS
- PDAs
- Telecom and Network Systems