ATXMEGA256D3-AU
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | AVR® XMEGA® D3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATXMEGA256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 256KB 128K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| EEPROM Size | 4K x 8 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 18 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATXMEGA256D3-AU Overview
For the purpose of saving space, it is available in the 64-TQFP package. The way of Surface Mount is used to mount it. Package Tray contains it. Device with AVR core processor issupported. Working at -40°C~85°C TA temperature is recommended. Memory type FLASH is used for program memory. 50 I/Os are present on the device. Based on its base part number of ATXMEGA256, other similarly-sized components can be found. At QUAD, it has its terminals. This circuit consists of 64 terminationals. There are a number of electrical components in the AVR? XMEGA? D3 series, including this one. As a result of the 1.8V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 64 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. This component is a part of Microcontrollers. A device with a memory size of 256kB can store programs and data. Power is provided by a source of 1.8/3.3V. Working at a frequency of 32MHz results in excellent efficiency. When 2.5V is employed, designers can fully utilize its adaptability and supply voltage. 5 timer/counters are present. An oscillator type Internal is required for it to work.
ATXMEGA256D3-AU Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA256D3-AU Applications
There are a lot of Microchip Technology ATXMEGA256D3-AU Microcontroller applications.
- Aerospace navigation systems
- Smoke alarms
- Air fryers
- Broadband technology, video and voice processing
- Information appliances (networking of household appliances)
- Current meter
- Hard drives
- Fax machines
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Entertainment products