ATV2500BQL-25JI
| Parameters | |
|---|---|
| In-System Programmable | NO |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 36MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EPROM |
| Propagation Delay | 25 ns |
| Frequency (Max) | 36MHz |
| Programmable Logic Type | OT PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 24 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
ATV2500BQL-25JI Overview
This network has 24macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the J package.The device has 32inputs and outputs.It is programmed that device terminations will be 44 .This electrical part is wired with a terminal position of QUAD.The power supply voltage is 5V.It is a part of the family [0].It has 44pins programmed.A digital circuit is built using 2500gates.If high efficiency is desired, the supply voltage should be kept at [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.This board has 44 pins.A maximum supply voltage of 5.5Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.In order for the device to operate, it requires 5V power supplies.There are 24 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. The frequency that can be achieved is 36MHz.It is recommended that the operating temperature be greater than 0°C.Temperatures should be lower than 85°C when operating.The status of input signals is determined by 13dedicated inputs.The maximal frequency should be lower than 36MHz.Programmable logic types are divided into OT PLD.
ATV2500BQL-25JI Features
J package
32 I/Os
44 pin count
44 pins
5V power supplies
ATV2500BQL-25JI Applications
There are a lot of Atmel (Microchip Technology) ATV2500BQL-25JI CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- I/O expansion
- Protection relays
- Handheld digital devices
- Synchronous or asynchronous mode
- Software-driven hardware configuration
- USB Bus
- POWER-SAVING MODES
- High speed graphics processing
- Custom shift registers