ATSAMD21G18A-MU
| Parameters | |
|---|---|
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21G18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
ATSAMD21G18A-MU Overview
It is available in the 48-VFQFN Exposed Pad package for the benefit of saving space. The way of mounting it is Surface Mount. It is available in the Tray package. A core processor of ARM? Cortex?-M0+ is present in the device. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 38 I/Os can be found on it. It has a base part number of ATSAMD21G18 that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. It has 48 terminationals. The SAM D21G series contains this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 48 pins are required to construct this device. A method of mounting is used, which is Surface Mount. It falls under the category of Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. Its core architecture is based on ARM. There is a maximum current supply of 7mA. When working at a frequency of 48MHz it is able to achieve excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. There are 6 timers/counters. CPU family CORTEX-M0 comprises the part. There is an oscillator type Internal used in this circuit.
ATSAMD21G18A-MU Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21G18A-MU Applications
There are a lot of Microchip Technology ATSAMD21G18A-MU Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Paper shredders
- Kindle
- Light sensing & controlling devices
- Coffee machines
- Ipad
- Robots
- Automatic control
- Microwave ovens
- Hearing aids