ATSAMD20E14B-MU
| Parameters | |
|---|---|
| Factory Lead Time | 30 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E14 |
| JESD-30 Code | S-XQCC-N32 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| Speed | 48MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 16384 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20E14B-MU Overview
As a result, it is available in the 32-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. You can find it in the package of Tray. The device runs in ARM? Cortex?-M0+ core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. 26 I/Os can be found on it. Other components that are comparable to it have the base part number ATSAMD20E14. A QUAD position is assigned to its terminals. A 32 termination is contained within it. The electrical component is part of the series SAM D20E. By using a 3.3V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. In the device, the clock runs at 32MHz. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. Using an oscillator type Internal, it operates.
ATSAMD20E14B-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20E14B-MU Applications
There are a lot of Microchip Technology ATSAMD20E14B-MU Microcontroller applications.
- Guidance-GPS
- Hard drives
- Virtual reality VR robots
- Robotic prosthetic limbs
- Robots
- Fire detection & safety devices
- Missile control
- Scanners
- Television
- Smart instruments