ATSAMC21E18A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM C21 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMC21 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | CAN, I2C, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b, 1x16b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMC21E18A-AUT Overview
A space-saving advantage is that it is included in the 32-TQFP package. Mounted using Surface Mount. This item can be found in package Tape & Reel (TR). A core processor of ARM? Cortex?-M0+ is present in the device. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 26 I/Os have been provided by the device. In order to find similar components, it has a base part number of ATSAMC21. The position of the device is QUAD at terminal. 32 terminations are present in it. The SAM C21 series contains this electrical component. The 5V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 32 pins are used to construct it. The devices have a memory size of 256kB that can be used to store programs and data. In terms of architecture, it is based on ARM. At a frequency of 48MHz, it can achieve excellent efficiency. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.7V. Internal is the oscillator type it uses.
ATSAMC21E18A-AUT Features
32-TQFP package
Mounting type of Surface Mount
ATSAMC21E18A-AUT Applications
There are a lot of Microchip Technology ATSAMC21E18A-AUT Microcontroller applications.
- Oscilloscopes
- Digital set-top boxes
- Blood pressure monitors
- Security systems
- Industrial robot
- Nintendo
- Projectors
- Scanners
- Graphic terminals
- Embedded gateways