ATSAMA5D27C-LD1G-CU
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAMA5D2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | compliant |
| Base Part Number | ATSAMA5D27 |
| JESD-30 Code | S-PBGA-G361 |
| Supply Voltage-Max (Vsup) | 1.3V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 32768 |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Number of Serial I/Os | 10 |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| On Chip Data RAM Width | 32 |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Number of DMA Channels | 51 |
| Height Seated (Max) | 1.2mm |
| Length | 16mm |
ATSAMA5D27C-LD1G-CU Overview
The microprocessor is convenient for international shipping since it is packaged in 289-LFBGA. High reliability is achieved by using advanced packaging methods Tray. Cores/Bus width is 1 Core 32-Bit. Understand the operating temperature around -40°C~85°C TA. A SAMA5D2 series item. The CPU is powered by a ARM? Cortex?-A5 core. There are LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers used by this CPU. This microprocessor features interfaces I2C, SMC, SPI, UART, USART, QSPI. 3.3V is the CPU's I/O address. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Try searching for variants of the cpu microprocessor with ATSAMA5D27. To date, there have been 361 terminations. With a 1.2V voltage supply, the part should be turned on and run. It is an architecture with 32 bits. It can supply a maximum current of 1.3V. There is 24MHz clock frequency for the microprocessor. Data is received between peripherals by 10 serial I/Os. DMA (Direct Memory Access) is programmed using 51 channels.
ATSAMA5D27C-LD1G-CU Features
ARM? Cortex?-A5 Core
32-Bit Structure
ATSAMA5D27C-LD1G-CU Applications
There are a lot of Microchip Technology ATSAMA5D27C-LD1G-CU Microprocessor applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Home appliances
- Torpedo guidance
- Security systems
- Computed Tomography (CT scan)
- Robots
- 8. Navigation control field
- Wastewater treatment
- Light sensing & controlling devices
- Glucose monitoring systems (for Type 1 Diabetes)