ATSAMA5D27C-D5M-CU
| Parameters | |
|---|---|
| Number of Terminations | 289 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Base Part Number | ATSAMA5D27 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Bit Size | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Number of Serial I/Os | 9 |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| On Chip Data RAM Width | 16 |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Number of DMA Channels | 51 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 10 Weeks |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAMA5D2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
ATSAMA5D27C-D5M-CU Overview
The microprocessor is convenient for international shipping since it is packaged in 289-LFBGA. High reliability is achieved using advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Recognize operating temperatures around -40°C~85°C TA. This is part of the SAMA5D2 series. Core-wise, this CPU has a ARM? Cortex?-A5 processor. The CPU contains LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers. A I2C, SMC, SPI, UART, USART, QSPI interface has been added to this microprocessor in order to serve the user better. As far as I/O is concerned, this CPU runs at 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Try searching for variants of the cpu microprocessor with ATSAMA5D27. Total terminations are 289. With a 1.8V voltage supply, the part should be turned on and run. A 16-Bit architecture is used. 1.9V is its maximum supply current. 24MHz is the microprocessor's clock frequency. 9 serial I/Os are set to communicate datas between peripherals. Programming DMA (Direct Memory Access) is done on the 51 channels.
ATSAMA5D27C-D5M-CU Features
ARM? Cortex?-A5 Core
16-Bit Structure
ATSAMA5D27C-D5M-CU Applications
There are a lot of Microchip Technology ATSAMA5D27C-D5M-CU Microprocessor applications.
- Oil and gas
- Set-top boxes
- Routers
- Heart rate monitors
- Fax machines
- Communication-bluetooth, Wi-Fi, radio
- Laminators
- Ipad
- Hand-held metering systems
- Petrochemical