ATSAM4E8CA-ANR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | SAM4E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Base Part Number | ATSAM4E |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | CAN, Ethernet, I2C, IrDA, MMC, SD, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, IrDA, MMC/SD, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M4F |
| Low Power Mode | YES |
| Number of ADC Channels | 12 |
| On Chip Data RAM Width | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATSAM4E8CA-ANR Overview
There is a 100-LQFP package available to save space. Using Surface Mount, it is mounted. This item can be found in package Tape & Reel (TR). It is equipped with a ARM? Cortex?-M4 core processor. It is important to keep the temperature at -40°C~105°C TA while working. It has a type of program memory of FLASH. The device has 79 I/Os. Based on its base part number of ATSAM4E, other similarly-sized components can be found. At QUAD, its terminals are located. A 100 termination is contained within it. In the SAM4E series, this electrical component is found. By using a 1.2V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 100 pins are used to construct it. It falls under the category of Microcontrollers. A device with a memory size of 512kB can store programs and data. ARM is the foundation of its architecture. This device works well at 120MHz frequency when it is operating at a high rate of efficiency. While deploying 1.2V, designers will be able to fully take advantage of its adaptability. It appears that there are 3 timers/counters in use. It is part of the CORTEX-M4F CPU family. There is an oscillator type Internal used in this circuit.
ATSAM4E8CA-ANR Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM4E8CA-ANR Applications
There are a lot of Microchip Technology ATSAM4E8CA-ANR Microcontroller applications.
- Instrument control
- Smartphone
- Television
- Hearing aids
- Projector
- Fax machines
- X-ray
- DCS control intelligent sensor
- Kindle
- Industrial instrumentation devices