ATSAM3S1AB-MUR
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | SAM3S |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Base Part Number | ATSAM3S1 |
| JESD-30 Code | S-XQCC-N48 |
| Supply Voltage-Max (Vsup) | 1.95V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x10/12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAM3S1AB-MUR Overview
A space-saving advantage is that it is included in the 48-VFQFN Exposed Pad package. Using Surface Mount, it is mounted. A package of Tape & Reel (TR) contains it. It is equipped with a ARM? Cortex?-M3 core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. A total of 34 I/Os are present. Based on the ATSAM3S1 base part number, it can be compared with other components. The terminals are positioned at QUAD. A 48 termination is contained within it. In the SAM3S series, this electrical component is found. The supply voltage of 1.8V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The devices have a memory size of 64kB that can be used to store programs and data. Its core architecture is based on ARM. Using a frequency of 64MHz, it is very efficient. In total, there are 3 timers and counters. Normally, the supply voltage (Vsup) should remain above 1.62V. An oscillator type Internal is required for it to work.
ATSAM3S1AB-MUR Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAM3S1AB-MUR Applications
There are a lot of Microchip Technology ATSAM3S1AB-MUR Microcontroller applications.
- Computed Tomography (CT scan)
- Toasters
- Data acquisition and control
- Industrial robot
- X-ray
- Hand-held metering systems
- Magnetic resonance imaging (MRI)
- Projector
- Missile control
- Virtual reality VR robots