ATSAM3A8CA-CU
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM3A |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 84MHz |
| Base Part Number | ATSAM3A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 63 |
| RAM Size | 96K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 1 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of DAC Channels | 2 |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3A8CA-CU Overview
Due to the benefits of saving space, it is available in the 100-TFBGA package. A Surface Mount mounting method is used. A package of Tray contains it. The device has a ARM? Cortex?-M3 core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. There are 63 I/Os on it, which makes it a very simple device. It has a part number of ATSAM3A that can be used to locate similar components. The position of the device is BOTTOM at terminal. 100 terminations are present in it. An electrical component such as this is included in the series SAM3A. High efficiency is possible due to the 1.8V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed using 100 pins. It falls under the category of Microcontrollers. A device with a memory size of 512kB can store programs and data. The core architecture of the system is ARM. Using a frequency of 84MHz, it is very efficient. A designer is able to make full use of the adaptability and supply voltage of 3.6V by using it. 1 counters/timers are currently active. It is one of the members of the CPU family CORTEX-M3. An oscillator of type Internal is used.
ATSAM3A8CA-CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3A8CA-CU Applications
There are a lot of Microchip Technology ATSAM3A8CA-CU Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Leakage current tester
- Calculators
- Automatic staplers
- Automatic control
- Security systems
- Ipod
- ECG machine
- Guidance-GPS
- Calculator