ATMEGA168P-20AU
| Parameters | |
|---|---|
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA168P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
ATMEGA168P-20AU Overview
For space savings, it is available in the 32-TQFP package. This is mounted using the Surface Mount method. A package of Tray contains it. A AVR core processor powers the device. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. It has a number of 23I/Os. Based on its base part number of ATMEGA168P, other similarly-sized components can be found. The terminals of this device are set to QUAD. 32 terminationals are present. It is a member of the AVR? ATmega series of electrical components. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A number of 32 pins are used to construct it. Based on the Surface Mount method, it is mounted. This component is a part of Microcontrollers. A device with a memory size of 16kB can store programs and data. In this case, 9mA represents the maximum current supply. At a frequency of 20MHz, it can achieve excellent efficiency. 3 timer/counters are present. Normally, the supply voltage (Vsup) should remain above 4.5V. Using oscillator type Internal makes it work.
ATMEGA168P-20AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168P-20AU Applications
There are a lot of Microchip Technology ATMEGA168P-20AU Microcontroller applications.
- DVD\DV\MP3 players
- Leakage current tester
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Mobile computers
- Fabric
- Traditional industrial transformation
- Ipod
- Removable disks
- Microwave ovens
- Tape drives