ATMEGA164PV-10PU
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Termination | Through Hole |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA164P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 4.826mm |
| Length | 52.58mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA164PV-10PU Overview
Due to its space-saving qualities, it is available in the 40-DIP (0.600, 15.24mm) package. A Through Hole mounting method is used. You can find it in the package of Tube. Devices with AVR core processors are available. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 32 I/Os on the board. Based on its base part number of ATMEGA164P, other similarly-sized components can be found. DUAL is the position of its terminals on the board. A 40 termination is contained within it. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. The structure is composed of 40 pins. The method of Through Hole is used to mount it. This component is a part of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 16kB. A maximum supply current of 9mA is set. There is 2/5V power source in this device. It is highly efficient when it works at a frequency of 10MHz. There are currently 3 timers/counters set up on the system. Normal operation requires a supply voltage (Vsup) that is higher than 2.7V. Internal is the oscillator type it uses.
ATMEGA164PV-10PU Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA164PV-10PU Applications
There are a lot of Microchip Technology ATMEGA164PV-10PU Microcontroller applications.
- Removable disks
- Telephone sets
- Home appliances
- Dryers
- Calculators
- Industrial instrumentation devices
- Mice
- Dishwashers
- Kindle
- Washing machines