ATMEGA164PV-10AU
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA164P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA164PV-10AU Overview
There is an option to purchase it in the 44-TQFP package, which saves space. This is mounted using the Surface Mount method. This item can be found in package Tray. The device has a AVR core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 32 I/Os on it, which makes it a very simple device. It has a base part number of ATMEGA164P that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. This circuit consists of 44 terminationals. The electrical component is part of the series AVR? ATmega. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 44 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. It is one of the components included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 16kB. There is a maximum current supply of 9mA. Powered by a 2/5V source. This device works well at 10MHz frequency when it is operating at a high rate of efficiency. A total of 3 timers/counters have been set up. In order to maintain normal operation, Vsup must be above 2.7V. Using an oscillator type of Internal, it works.
ATMEGA164PV-10AU Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA164PV-10AU Applications
There are a lot of Microchip Technology ATMEGA164PV-10AU Microcontroller applications.
- Routers
- Walkie talkies
- Monitoring-temperature level, oil level, speed, distance, acceleration
- DDC control
- Aerospace navigation systems
- Nintendo
- Coffee machines
- DCS control intelligent sensor
- Digital cameras
- Set-top boxes