ATF750C-10JU
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF750C(L) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 90MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF750 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 750 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF750C-10JU Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 28-LCC (J-Lead) package.There are 10 I/Os on the board.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.A voltage of 5Vprovides power to the device.There is a part included in Programmable Logic Devices.Tubeshould be used for packaging the chip.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.It belongs to the ATF750C(L)series of FPGAs.This device is also capable of displaying [0].The ATF750contains its related parts.As a building block for digital circuits, there are 750gates.High efficiency requires the supply voltage to be maintained at [0].In general, it is recommended to store data in [0].This device is mounted by Surface Mount.The 28pins are designed into the board.It operates at a maximum supply voltage of 5.5V volts.In order for it to operate, a supply voltage of 4.5Vis required.Currently, it is powered by 5Vsources.In this case, 90MHzis the frequency that can be achieved.It has 11dedicated inputs for detecting input signals.
ATF750C-10JU Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pins
5V power supplies
ATF750C-10JU Applications
There are a lot of Microchip Technology ATF750C-10JU CPLDs applications.
- I/O PORTS (MCU MODULE)
- Digital designs
- State machine control
- I/O expansion
- Preset swapping
- Cross-Matrix Switch
- Field programmable gate
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Reset swapping
- ON-CHIP OSCILLATOR CIRCUIT