ATF1500A-10AI
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Frequency (Max) | 125MHz |
| Number of Gates | 1000 |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | A |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | NO |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
ATF1500A-10AI Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a A package.In this case, there are 32 I/Os programmed.It is programmed to terminate devices at [0].A voltage of 5Vprovides power to the device.There are 44pins on the chip.If you use this device, you will also find [0].In digital circuits, 1000gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].Surface Mountis the mounting point of this electronic part.The pins are [0].There is a maximum supply voltage of 5.5V.The device is designed to operate with a minimal supply voltage of 4.5VV.There is 5V power supply available for it.There should be a temperature above -40°Cat the time of operation.It is recommended to keep the operating temperature below 85°C.It is recommended that the maximal frequency be less than 0.
ATF1500A-10AI Features
A package
32 I/Os
44 pin count
44 pins
5V power supplies
ATF1500A-10AI Applications
There are a lot of Atmel (Microchip Technology) ATF1500A-10AI CPLDs applications.
- Dedicated input registers
- DDC INTERFACE
- Handheld digital devices
- Programmable polarity
- Discrete logic functions
- Software-Driven Hardware Configuration
- Preset swapping
- Custom shift registers
- Field programmable gate
- Bootloaders for FPGAs