ATA6836C-TIQY-19
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Applications | Bulbs, DC Motors, Resistors |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | ATA6836C |
| Number of Outputs | 6 |
| Max Output Current | 650mA |
| Interface | SPI |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 7.5V |
| Nominal Supply Current | 800μA |
| Output Configuration | Half Bridge (6) |
| Output Current | 650mA |
| Max Supply Current | 150μA |
| Rise Time | 100ns |
| Fall Time (Typ) | 100 ns |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Number of Drivers | 6 |
| Rds On (Typ) | 1Ohm LS, 1Ohm HS |
| Current - Peak Output | 650mA |
| Load Type | Inductive, Capacitive, Resistive |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ATA6836C-TIQY-19 Overview
Packaged using Tape & Reel (TR).For cost-saving purposes, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.Reliabilbridge drivery can be improved by increasing 4.75V~5.25V's supply voltage.H bridge circuit is put into place according to the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in Bulbs, DC Motors, Resistors as well.PCB mounting is performed using Surface Mount.Status Flag is another of full bridges specific characteristics.In signal interfaces, 28 pins serve as pronged contacts.Its base H bridge ic number, ATA6836C, is used to identify related H bridge ics.During a specified ambient temperature, the power supply can supply the maximum load current 650mA.The maximum amount of current which output reaches 650mA.The output pins and the power supply pins are conducting 650mA current.It is equipped with 6 outputs.The 6 drivers have been integrated into the system.The acceptable maximum value of operating temperature is 150°C so as to avoid excessive costs.In order to avoid excessive costs, a minimum operating temperature of -40°C is acceptable.
ATA6836C-TIQY-19 Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : ATA6836C
Subcategory: 650mA
Operate supply voltage at -40°C
ATA6836C-TIQY-19 Applications
There are a lot of Microchip Technology ATA6836C-TIQY-19 Full Bridge Drivers, Half-Bridge Drivers applications.
- Dual DC motor
- Industrial Pumps
- Optical disc drives
- High current, low profile DC-DC converters
- PC peripherals
- DC-DC Converters
- High-Current DC-DC Point-of-Load Converters
- Workstations
- Voltage Regulators
- VTR