AT91SAM9260B-QU
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AT91SAM |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 180MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT91SAM9260 |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, EBI/EMI, Ethernet, I2C, I2S, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 96 |
| RAM Size | 8kB |
| Memory Type | ROM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | POR, WDT |
| Bit Size | 32 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of ADC Channels | 4 |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM, SRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART |
| ROM Programmability | FLASH |
| Number of SPI Channels | 2 |
| Number of Ethernet Channels | 1 |
| Height | 3.6mm |
| Length | 28mm |
| Width | 28mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT91SAM9260B-QU Overview
Due to its 208-BFQFP packaging, it is convenient to ship overseas. High reliability is achieved using advanced packaging method Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . Understand the operating temperature around -40°C~85°C TA. It comes from the AT91SAM series. A ARM926EJ-S processor powers this CPU. Memory controllers for this CPU are SDRAM, SRAM. This microprocessor features EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces to better serve its users. 1.8V 2.5V 3.3V is the I/O speed of this CPU. There is MICROCONTROLLER, RISC MICROCONTROLLER, RISC in the uPs, uCs, or peripheral ICs categories. AT91SAM9260 is a good way to search for variants of the microprocessor. In total, there are 208 terminations. When the voltage supply is 1.8V, the cpu microprocessor should be powered on and run. A 32-Bit architecture is used. A 180MHz frequency is used by the CPU. For functions of 208 pins, please refer to the datasheets. A typical Microcontrollers embedded microprocessor. To transfer data, there is a bandwidth of 32b. This CPU is widely used in many applications because of its Surface Mount mount. From 3.3V, the micro processor can be used. In general, RAM (Random-Access Memory) is designed with a 8kB of 0MB. The embedded microprocessor should not be supplied with a voltage higher than 3.6V. CPU microprocessors should be fed with 1.65V voltage. CPU programs transfer data via 96 I/Os. 32kB bytes of memory are allocated to the CPU. A CPU's 6 counters indicate how busy it is. The CPU is connected to POR, WDT peripheral devices.
AT91SAM9260B-QU Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
96 I/Os
POR, WDT Peripherals
AT91SAM9260B-QU Applications
There are a lot of Microchip Technology AT91SAM9260B-QU Microprocessor applications.
- Computer/laptop
- Toys
- Traditional industrial transformation
- Current meter
- Leakage current tester
- Smart highways (navigation, traffic control, information monitoring and car service)
- DVD\DV\MP3 players
- Metering & measurement field
- Agriculture, transportation field
- Glucose monitoring systems (for Type 1 Diabetes)