AT17LV256-10CU
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 12.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Memory Size | 256Kb |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Operating Mode | SYNCHRONOUS |
| Organization | 256KX1 |
| Memory Width | 1 |
| Density | 256 kb |
| Standby Current-Max | 0.0001A |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17LV256-10CU Overview
This package makes use of the 8-TDFN programming language.Tube external packaging.Licensed to operate in -40°C~85°C.Using the Serial EEPROM axis, it can be programmed to do whatever you want.FPGA is fed wFPGAh a voltage of 3V~3.6V 4.5V~5.5V.I have mounted this memory device in Surface Mount.FPGA is limFPGAed to 256Kb bytes for the size of the data storage.Try searching "AT17LV256" for more parts.There is a voltage requirement of 3.3V for supplying it with power.8 terminations with different functions.With 3.6V as the maximum voltage, the memory device can be used.3V is the minimum voltage required to supply the device.The temperature should be kept below 260 in reflow soldering.There are 8 pins on it.Using a 3.3V power supply is recommended for best results.For better customer service, IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO is added.This type of memory is called a EEPROM memory.In other words, it is suitable for applications using the Surface Mount operating system.Using the switching controller, you will be able to move the slider at a frequency of 12.5MHz.
AT17LV256-10CU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 12.5MHz.
AT17LV256-10CU Applications
There are a lot of Microchip Technology AT17LV256-10CU applications of configuration proms for FPGAs.
- nonvolatile BIOS memory
- networking
- servers
- multimedia computers
- personal computers
- Cache memory
- graphics card
- supercomputers
- telecommunications
- workstations,