AT17F16A-30JU
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F16A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Operating Mode | SYNCHRONOUS |
| Organization | 16MX1 |
| Memory Width | 1 |
| Density | 16 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F16A-30JU Overview
An interesting 20-LCC (J-Lead) package is used for this.Packing on the outside is Tube.In the state of -40°C~85°C, licensed to work.FLASH allows for programmability.FPGA is powered by a voltage which is 2.97V~3.63V volts, and this voltage is the voltage from which the generator is powered.There is a memory device mounted in Surface Mount position for this device.Search "AT17F16A" for related parts.FPGA reuqires a supply voltage of 3.3V.With different functions, 20 terminations can be used.FPGA is possible to use this memory device at a maximum voltage of 3.63V.There must be a minimum voltage of 2.97V to supply the device with the power it needs.The memory chip in this picture is called a CONFIGURATION MEMORY memory chip.The temperature should be kept below 245 in reflow soldering.FPGA has 20 pins.In order for the part to function safely and reliably as part of a circuit, 3.3V recommends that users apply 3.3V to the part prior to use in order to ensure that it will work properly.In addition to this, it is suitable for Surface Mount-applications as well.Using the switching controller, you will be able to move the slider at a frequency of 10MHz.A 50mA-based system operates.
AT17F16A-30JU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 10MHz.
AT17F16A-30JU Applications
There are a lot of Microchip Technology AT17F16A-30JU applications of configuration proms for FPGAs.
- personal digital assistants
- eDRAM
- personal computers
- graphics card
- mainframes
- data buffer
- cell phones
- DVD disk buffer
- workstations,
- multimedia computers