AT17F080-30JU
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F080 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| Operating Mode | SYNCHRONOUS |
| Organization | 8MX1 |
| Density | 8 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height | 3.68mm |
| Length | 9.04mm |
| Width | 9.04mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F080-30JU Overview
FPGA uses a neat 20-LCC (J-Lead) package.External packaging for the Tube series.An individual who is qualified to operate within the -40°C~85°C domain.With the help of FLASH, it can be programmed.FPGA is fed wFPGAh a voltage of 2.97V~3.63V.Surface Mount is the mounting position of this memory device.Look for "AT17F080" for other related parts.There is a voltage requirement of 3.3V for supplying it with power.20 terminations with different functions.With 3.63V as the maximum voltage, the memory device can be used.2.97V is the minimum voltage required to supply the device.The memory chip in question is a CONFIGURATION MEMORY memory chip.Reflow soldering should be done at no higher than 245 degrees.There are 20 pins on it.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.This is an application suitable for Surface Mount-based operating systems.The swicthing controller works at a frequency of 33MHz.A 20mA-based operating system is used.
AT17F080-30JU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 33MHz.
AT17F080-30JU Applications
There are a lot of Microchip Technology AT17F080-30JU applications of configuration proms for FPGAs.
- personal digital assistants
- telecommunications
- Cache memory
- graphics card
- Camcorders
- mainframes
- multimedia computers
- eDRAM
- main computer memory
- printers