AT17F040-30CU
| Parameters | |
|---|---|
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F040 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | Serial |
| Nominal Supply Current | 20mA |
| Operating Mode | SYNCHRONOUS |
| Organization | 4MX1 |
| Memory Width | 1 |
| Density | 4 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 17 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
AT17F040-30CU Overview
There is a neat 8-TDFN package that is used in this program.The external packaging of Tube is made of Tube plastic.-40°C~85°C license holder.FLASH allows for programmability.The voltage is 2.97V~3.63V.Surface Mount is the orientation of this memory device.Look for "AT17F040" for other related parts.There is a requirement that it is supplied with a voltage of 3.3V.There are different functions that can be applied on the 8 axis when it comes to terminating.There is a maximum voltage of 3.63V that can be applied to this memory device.FPGA is essential that a minimum voltage of 2.97V be supplied to the device in order for FPGA to function.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.When soldering in reflow mode, the temperature should be kept below 260 at all times during the soldering process.FPGA is equipped wFPGAh 8 pins.A 3.3V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.In addition, it is suitable for use in Surface Mount-based applications.In the swicthing controller, 33MHz is the frequency.
AT17F040-30CU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 33MHz.
AT17F040-30CU Applications
There are a lot of Microchip Technology AT17F040-30CU applications of configuration proms for FPGAs.
- graphics card
- Cache memory
- hard disk drive (HDD)
- mainframes
- main computer memory
- personal computers
- eDRAM
- supercomputers
- Camcorders
- cell phones