APX809-44SAG-7
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 30μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 4.29V |
| Max Reset Threshold Voltage | 4.47V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.29V |
| Overvoltage Threshold | 4.47V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
APX809-44SAG-7 Overview
There are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 3. 3 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 30μA. If you want to search for similar IC managements of this manufacturer, you can always refer to APX809, which is the base power ics number. It is possible to monitor 1 inputs at the same time on the power management as a whole.
APX809-44SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX809-44SAG-7 Applications
There are a lot of Diodes Incorporated APX809-44SAG-7 Voltage Supervisors applications.
- Utility meter
- Electric heating appliances
- External alarm
- Embedded computing
- Dash board
- Battery cars
- WiFi router
- Set top box
- Microprocessor system
- Battery cars