APA600-CQ352M
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 352-BFCQFP with Tie Bar |
| Number of Pins | 352 |
| Operating Temperature | -55°C~125°C TC |
| Packaging | Tray |
| Published | 2007 |
| Series | ProASICPLUS |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 352 |
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | QUAD |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | APA600 |
| Number of Outputs | 248 |
| Operating Supply Voltage | 2.5V |
| Power Supplies | 2.52.5/3.3V |
| Number of I/O | 248 |
| RAM Size | 15.8kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Total RAM Bits | 129024 |
| Number of Gates | 600000 |
| Max Frequency | 5MHz |
| Screening Level | MIL-STD-883 Class B |
| Number of Registers | 21504 |
| Height Seated (Max) | 2.89mm |
| Length | 48mm |
| Width | 48mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
APA600-CQ352M Overview
A 352-BFCQFP with Tie Bar package contains it, and it is available for download. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. 248 I/Os are available for transferring data more efficiently. In order to operate fpga chips, a voltage supply of 2.5V volts is required. FPGA parts like this belong to the Field Programmable Gate Arrays family. This FPGA module can be attached to the development board with a Surface Mount. The supply voltage of the device is 2.3V~2.7V , at which it runs. As part of the ProASICPLUS series of FPGAs, it is a type of FPGA. Fpga chips is recommended that the operating temperature be kept wFpga chipshin the range -55°C~125°C TC while the machine is operating. There are 248 outputs incorporated in this device. As a result of space limitations, this FPGA model has been included in Tray. There are a total of 352 terminations. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 129024 bFpga chipss. In order to find related parts, use the part number APA600 as a base. It is crucial that the RAM si15.8kBe of this FPGA module reaches 15.8kB so that the program can run normally. Fpga electronics is designed wfpga electronics h 352 pins. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. A 2.5V-volt supply allows designers to fully utilize its flexibility. In order for fpga electronics to work, fpga electronics requires a 2.52.5/3.3V power supply. Its basic building block contains 600000 gates. The structure of the registers used to store and transfer data consists of 21504 registers. As far as the speed of this FPGA is concerned, it can get up to 5MHz.
APA600-CQ352M Features
248 I/Os
Up to 129024 RAM bits
352 LABs/CLBs
21504 registers
APA600-CQ352M Applications
There are a lot of Microsemi Corporation APA600-CQ352M FPGAs applications.
- Device controllers
- Bioinformatics
- Aircraft navigation
- Cryptography
- High Performance Computing
- Automotive
- Computer hardware emulation
- Software-defined radio
- Embedded Vision
- Automation