AP3019AUKTR-G1
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Weight | 14.996898mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1.2MHz |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Output Current | 150mA |
| Max Supply Current | 3.2mA |
| Max Output Voltage | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 16V |
| Output Current per Channel | 550mA |
| Current - Output / Channel | 550mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 16V |
| Voltage - Supply (Min) | 2.5V |
| RoHS Status | ROHS3 Compliant |
AP3019AUKTR-G1 Overview
In order to save board space, the led driver uses the SOT-23-6 package. LED drivers designed using this technology use 1 outputs.Surface Mount is used to mount the led light driver.The system emerges as a DC DC Regulator with high efficiency.At -40°C~85°C TA, the led driver is capable of operating.The benefits of Backlight are considerable.It operates based on the frequency of 1.2MHz.It has a base of 6 pins.Having a voltage supply below 2.5V can lead to undetermined failures.Surface Mount is mounted on it.A maximum supply voltage of 16V is acceptable.The supply voltage is optimized to offer a maximum value of 16V.When the input voltage is set to 2.5V, it operates.When the maximum supply current is allowed, the value reaches 16V.With a minimum supply current less than 3.2mA, this device achieves high efficiency.It is important not to exceed 85°C in order to ensure stable operation.There is no current that can be supplied to the load.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.This electronic component can fully perform when the switching frequency is 1.2MHz.Voltages should not exceed 38V volts at the output.Transmission is available on 1 channels.
AP3019AUKTR-G1 Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Switching frequency of 1.2MHz
AP3019AUKTR-G1 Applications
There are a lot of Diodes Incorporated AP3019AUKTR-G1 LED Driver ICs applications.
- Gallery lighting
- Refrigeration lighting
- Linear fluorescent
- OLED power supply for portable equipment
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- LED headlights
- Panel lighting
- Stage Lighting and Signage
- Sports Facility Lighting