AP2805DM-G1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 60mOhm |
| RoHS Status | ROHS3 Compliant |
AP2805DM-G1 Overview
Tube is the way it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.This switch is of type USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Status Flag.In this case, the LED driving board can produce only 500mAV as its maximum output.
AP2805DM-G1 Features
AP2805DM-G1 Applications
There are a lot of Diodes Incorporated AP2805DM-G1 Power Switches ICs applications.
- Telecom and Network Systems
- PC Card Hot Swap
- Hot Swap
- Hot Swaps
- USB Power Distribution
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- HDD, SSD
- Wireless/Networking Cards