AP2311FGEG-7
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2311 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height Seated (Max) | 0.63mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AP2311FGEG-7 Overview
The package is in the form of a Tape & Reel (TR).There is a 8-UDFN Exposed Pad package that includes it.This LED driving board is mounted using the mounting type Surface Mount.A USB Switch switch type is owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.It has a total of Load Discharge, Status Flag features.This object belongs to the AP2311 family.It has a total of 8 terminations.The 8 pins are used for the operation of the system.It contains 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 8 pins.It has 135mOhm resistance.In this case, the output current is set to 2A.In this case, Vsup (maximum supply voltage) is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.
AP2311FGEG-7 Features
Supplied from 5V
Resistance of 135mOhm
1 channels
AP2311FGEG-7 Applications
There are a lot of Diodes Incorporated AP2311FGEG-7 Power Switches ICs applications.
- Hard Disk Drives
- Wireless Modem Data Cards
- Hot Swap
- Set-top-box
- Portable/Handheld Devices
- USB Power Distribution
- Low Voltage I/O System Power
- Wireless Headsets
- PDAs
- Set-Top Boxes