AP22800HB-7
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Surface Mount | YES |
| Weight | 37.393021mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Feature | Power Good, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 19mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 660mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-N8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Current - Output (Max) | 4A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Fault Protection | UVLO |
| Telecom IC Type | TELECOM CIRCUIT |
| Rds On (Typ) | 19m Ω |
| Height Seated (Max) | 0.605mm |
| RoHS Status | ROHS3 Compliant |
AP22800HB-7 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 8-UFDFN Exposed Pad package as well.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.There are Power Good, Slew Rate Controlled features available on the LED driving board.It consists of 8 terminations in total.It is important to note that the LED driving board has 1 functions.This LED driver has a maximum output of 4AV.In order to meet the operation criteria, the maximum output current drops to 6A.With a supply voltage of 5V, high efficiency is possible.19mOhm resistance is present in the lighting driver.
AP22800HB-7 Features
Supplied from 5V
Resistance of 19mOhm
AP22800HB-7 Applications
There are a lot of Diodes Incorporated AP22800HB-7 Power Switches ICs applications.
- Notebook and Tablet Computers
- Smartphone and PDA
- Hot Swaps
- Hot Swap
- Wearable Devices
- Telecom and Network Systems
- USB Ports/Hubs
- USB Power Distribution
- Portable/Handheld Devices
- Storage Drives