AP2280-2FMG-7
| Parameters | |
|---|---|
| Voltage - Load | 1.5V~6V |
| Telecom IC Type | TELECOM CIRCUIT |
| Rds On (Typ) | 80m Ω |
| Height | 555μm |
| Length | 1.88mm |
| Width | 2.075mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 19 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 200mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 1.26W |
| Max Power Dissipation | 750mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2280 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Voltage | 6V |
| Interface | On/Off |
| Current | 2A |
| Output Configuration | High Side |
| Power Dissipation | 750mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
AP2280-2FMG-7 Overview
A Tape & Reel (TR) is used to package it.This package is included in 6-UFDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts has been specified.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.There is a AP2280 family of things that it belongs to.As a result, there are 6 terminations.The 6 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2A.Supply voltages of 5V allow for high efficiency.It is mounted in the way of Surface Mount.A total of 6 pins are present on it.The LED driver has 200mOhm resistance.This case results in a 0A output current.
AP2280-2FMG-7 Features
Supplied from 5V
Resistance of 200mOhm
AP2280-2FMG-7 Applications
There are a lot of Diodes Incorporated AP2280-2FMG-7 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Smartphone and PDA
- HDD, SSD
- Wireless/Networking Cards
- Set-top-box
- PC Card Hot Swap
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Solid-State Drives